Magicard HoloKote Custom Logo Setup + Key - Rio & Tango Models

Magicard HoloKote Custom Logo Setup + Key - Rio & Tango Models Options

Your Printer Serial Number

---

HoloKote Options (Rio/Tango 2, 2e & +L Only)
<Select One>Add Printer Lock Feature + $0Blank Key w/Printer Lock - Subtract $250

---

Orientation Options (Rio & Tango Only)
<Select One>Landscape OrientationPortrait OrientationI Don't Have a 1st Gen Rio/Tango & Don't Need to Specify Orientation

---

Magicard HoloKote Custom Logo Setup + Key - Rio & Tango Models Description

The Magicard HoloKote Custom Key prints your custom graphic into the overlay panel during the normal card printing cycle, providing anti-counterfeit protection to your cards. HoloKote repeats your custom watermark in a frosted image that is invisible when viewed normally. When flexed or held at an angle in direct light, your custom HoloKote image is clearly visible.

Your custom image is encrypted and electronically stored on a Custom Key so that duplication of your image is not possible. The Custom Key is also available with a printer lock feature so that your Rio or Tango ID card printer can only be used when the key is in place.

Use Magicard HoloPatch cards along with HoloKote for an appearance similar to a holographic patch and add additional card security at an affordable price.

If you would like to see a sample of how your HoloKote custom key will look, navigate to the Magicard HoloKote Preview System.

Please download and complete the Custom Key Data Form. Fax your completed form to us toll-free at 888-496-3390.

What is the difference between HoloKote and HoloKote FLEX? HoloKote uses a fixed 6x4 grid pattern that is repeated across the surface of your cards, whereas HoloKote FLEX allows you to specify the size and location of your custom watermark across the area of your cards.

Brochure

Magicard HoloKote Custom Logo Setup + Key - Rio & Tango Models Specifications

For use with the following custom HoloKote-capable Magicard printers:

• Rio
• Rio 2
• Rio 2e
• Tango
• Tango 2
• Tango 2e
• Tango +L

Options

• Printer lock feature
• Blank key with printer lock only
• Magicard HoloKote duplicate custom key

Notes

• Please allow 2-3 weeks processing time.
• Printer lock feature is not applicable to first generation Rio and Tango printers.
• Orientation selection applies only to first generation Rio and Tango printers.
• Orientation for Rio 2, Rio 2e, Tango 2, Tango 2e and Tango +L printers can be freely selected in the printer driver.
• Contact us with any questions that you may have about this process!

Please download and complete the Custom Key Data Form. Fax your completed form to us toll-free at 888-496-3390.

Related Items