Now until the end of June, receive -
- $25 offorders over $250
- $75 off orders over $500
- $150 off orders over $1,000 (max. $500 in savings).
- Use coupon code SUMMER19 at checkout
- Promotion only applies to shipments within the United States
- Some exclusions may apply. Note: Offer can be combined with the following promotions:
- Free shipping for orders over $100
- Free set-up on custom lanyards and badge reels ($240 savings)
- Trade-in your old printer for a new one and receive up to a $700 credit
- Offer valid June 17-30, 2019
CR80.10 Mylar PVC Cards Description
CR8010 Mylar adhesive-backed PVC cards are ideal for printing on most direct-to-card printers. The Mylar backing offers greater thickness than paper backing for easier feeding. Adhesive backed PVC cards are typically applied to proximity/technology cards.
These cards are CR80 size, which is the standard, most commonly used plastic card size, measuring 3.375'' x 2.125'', the same dimensions as a credit card. CR80 10 mil Mylar adhesive back PVC cards are also known as:
These Mylar adhesive back CR80 PVC cards are 10 mil thick and are packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cads, and are vision inspected to ensure quality.
Remember: If you're placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the Mylar adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Note: 10 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if your printer is capable of printing on these thin cards, call us at (800) 321-4405 x2 or chat live.
CR80.10 Mylar PVC Cards Specifications
Box of 500 CR80 10 mil white adhesive-backed graphic-quality PVC cards with a mylar backing.
- Superior/graphic quality cards
- 500 cards (packaged in 5 packs of 100)
- 100% PVC
- CR80 - standard credit card size
- 3.375" x 2.125" (85.6 mm x 54 mm)
- 0.10 mil thickness*
- Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
*Card thickness is approximately 0.25 mil before removal of 0.15 mil adhesive back. May not feed/work in every dye-sub card printer. Please check your card printer specifications.
Note: Part number CR8010MYAB corresponds with the following vendor part numbers:
- Fargo - 82267
- Zebra - 104523-010