Fargo 44282 Color Ribbon Description
Fargo 44282 half-panel ribbons are used for printing a combination of half-card color images and whole card one-color text or barcodes.
Fargo 44282 half-panel ribbons include half-size yellow (Y), magenta (M), and cyan (C) panels, for printing full-color images. The full-size resin black (K) panel is used for printing text and barcodes, and the overlay (O) panel is a thin protective panel that is applied to the card surface.
Fargo 44282 half panel ribbons include Y, M, and C half panels and a full-size resin K and clear O panels. A cleaning roller and refillable cartridge is also included with this ribbon. This refillable starter cartridge is economical and Earth-friendly; rather than throwing away the plastic cartridge, simply refill it with a replacement YMCKO ribbon refill.
Please save the Earth-Friendly cartridge for future use as refill ribbons do not contain an additional cartridge.
Half-panel ribbons allow you to print color on up to half the length of a standard CR80-size PVC card, while resin black may be printed on any area of the card. If you're only printing full-color on part of your cards, Fargo 44282 half panel ribbons allow twice the normal ribbon yield than a standard YMCKO ribbon, at a lower cost per card.
The illustration below shows the difference between when a standard YMCKO ribbon is appropriate and when a Fargo 44282 half-panel ribbon may be the right ribbon for you.
ID Wholesaler is an authorized Fargo reseller specializing in ID card printing products. We guarantee that our 44282 ribbons are genuine Fargo ribbons, are properly stored, and are always 'fresh'.
Fargo 44282 Color Ribbon Specifications
- Manufacturer and item#: Fargo 44282
- A Fargo refillable ribbon cartridge is required for use of this ribbon
- YMC half panels & full KO panels color ribbon with refillable cartridge
- Cleaning roller included
- 350 prints per roll
- Fargo 44282 ribbon is for use with Fargo DTC400 and DTC400e card printers
Please Note: Fargo has updated the RFID technology used with this ribbon which may require you to update your firmware. See the complete details on this upgrade on our Fargo Ribbon and Laminate RFID Tag Update page.