Frequently Purchased Together
Fargo 82607 Laminate Description
Fargo 82607 half patch lamination (also referred to as alternating overlamination) provides a layer of protection over your printed cards, making them more durable and providing protection from wear and fading. The Fargo 82607 applies a half-patch laminate on the magnetic stripe side or back side of the card.
Fargo 82607 laminate is perfect for magnetic stripe cards applying maximum overlamination while leaving the card's magnetic stripe exposed.
Note: for maximum protection of your magnetic stripe cards use the 82608 Half Patch laminate in conjunction with the Fargo 82600 0.6 mil PolyGuard Laminate - 250 imprints to apply a full patch laminate to the front side of the card.
A printer with lamination capability is needed in order to use Fargo 82607 overlamination.
Fargo card printers require specialized Fargo overlaminate to function properly. To maximize printed card quality and printer durability, use only genuine Fargo overlaminate.
Fargo 82607 is compatible with Fargo HDP8500, HDP5000, DTC4500, and DTC1500 laminating printers, in cartridge 2.
ID Wholesaler offers a low price guarantee on Fargo 82607 0.6 mil clear lamination.
Did you know that Fargo 82607 ribbons have a shelf life?
When stored under proper conditions, Fargo 82607 laminate ribbons typically have a shelf life of up to one year. Ribbons that are more than a year old, and improperly stored, will not print optimally and will likely end up costing more money and time in maintenance and in reprinting cards.
ID Wholesaler is an authorized Fargo reseller specializing in ID card printing products. We guarantee that our 82607 laminates are genuine Fargo ribbons, are properly stored, and are always 'fresh'.
How do you find your ribbon's shelf life?
To find whether your ribbon is past its shelf life, look for the manufactured date above the part number on the sticker on the box.
Fargo 82607 Laminate Specifications
- Manufacturer and item#: Fargo 82607
- Clear 1/2 patch overlaminate for magstripe cards
- 0.6 mil thick
- 250 imprints per roll
- For use with the following Fargo lamination modules cartridge 2:
Note: All HDP8500, HDP5000, DTC4500, DTC4500e and DTC1500 lamination modules utilize a cartridge system to load overlaminate materials. A HDP8500, HDP5000, DTC4500, DTC4500e and DTC1500 single-sided lamination module utilizes only cartridge 1, while a duplex simultaneous lamination module utilizes cartridges 1 and 2.
Please Note: Fargo has updated the RFID technology used with this ribbon which may require you to update your firmware. See the complete details on this upgrade on our Fargo Ribbon and Laminate RFID Tag Update page.