CR7910 adhesive-backed PVC cards are ideal for printing on most direct-to-card printers and are typically applied to proximity/technology cards.
CR79 cards are slightly smaller dimensionally than the standard CR80, measuring 3.303'' x 2.051''. CR79 10 mil cards are made to fit into the inside edge of a proximity card.
CR79 10 mil adhesive back cards are also known as:
Packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cards, CR7910AB card are vision inspected to ensure quality.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Remember: If you're placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid printhead damage. See our Slot Punches section for options..
Note: Card thickness is 20 mil before removabl of 10 mil adhesive back. 20 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if your printer is capable of printing on these thin cards, call us at (800) 321-4405 x2 or chat live.
*Card thickness is 0.20 mil before removal of 0.10 mil adhesive back. May not feed/work in every dye-sub card printer. Please check your card printer specifications.
Note: Part number CR7910AB corresponds with the following vendor part numbers:
|Printer Compatibility||C50, DTC1000Me, DTC1250e, DTC4250e, DTC4500e|
|Quantity Per Pack||500 Per Pack|