EDIsecure DIC10192 1.0 Mil Alternating Clear Patch Laminate

  • Manufacturer and item#: EDIsecure DIC10192
  • Clear Patch Laminate
  • Magstripe cut-out
  • 1.0 mil thickness
  • For the lamination of cards after printing in re-transfer printers
  • 275 imprints per roll
  • For use with the following EDIsecure lamination modules:
    • ILU Inline Lamination Unit
    • ILM Inline Lamination Module
  • For use with the following EDIsecure printers with lamination:
    • XID560ie
    • XID570ie
    • XID580ie
    • XID590ie
    • XID9300
    • XID9330
    • DCP360+

NOTE: This laminate DOES NOT work with the ILM-LS Inline Lamination Module (lower side) or the ILM-DS Inline Lamination Module (dual side).

IDW Care

Every order is protected by the IDW Care Promise

Item #: DIC10192
MSRP $200.00
Price
$180.00
You Save ($20.00)
$180.00
Quantity
QTY

$Price Match Guarantee

Frequently Purchased Together

EDIsecure DIC10192 Laminate Description

Extend the life of your ID cards with EDIsecure DIC10192 Lamination (or overlamination). Lamination provides a thin layer of protection to increase resistance to fading and wear, reducing your need to reprint ID cards.

EDIsecure DIC10192 laminate is for dual-sided lamination of cards that include a magnetic stripe. The alternating panels include a full panel that covers the entire surface of one side of the card and a half-panel that leaves the magnetic stripe exposed on the other side.

To use the EDIsecure DIC10192 overlamination you will need a printer with lamination capability.

To ensure the best performance from your EDIsecure ID printer, EDIsecure recommends using genuine EDIsecure supplies.

Did you know that EDIsecure DIC10192 Laminates have a shelf life?

When stored under proper conditions, EDIsecure DIC10192 laminate ribbons typically have a shelf life of up to one year. Ribbons that are more than a year old, and improperly stored, will not print optimally and will likely end up costing more money and time in maintenance and in reprinting cards.

ID Wholesaler is an authorized EDIsecure reseller specializing in ID card printing products. We guarantee that our DIC10192 Laminates are genuine EDIsecure ribbons, are properly stored, and are always 'fresh'.

EDIsecure DIC10192 Laminate Specifications

  • Manufacturer and item#: EDIsecure DIC10192
  • Clear Patch Laminate
  • Magstripe cut-out
  • 1.0 mil thickness
  • For the lamination of cards after printing in re-transfer printers
  • 275 imprints per roll
  • For use with the following EDIsecure lamination modules:
    • ILU Inline Lamination Unit
    • ILM Inline Lamination Module
  • For use with the following EDIsecure printers with lamination:
    • XID560ie
    • XID570ie
    • XID580ie
    • XID590ie
    • XID9300
    • XID9330
    • DCP360+

NOTE: This laminate DOES NOT work with the ILM-LS Inline Lamination Module (lower side) or the ILM-DS Inline Lamination Module (dual side).

EDIsecure DIC10192 Laminate Reviews